Optional) Setting The Nas Port Format Of A Radius Server - Huawei Quidway S2700 Series Configuration Manual

Quidway S2700 Series Ethernet Switches
Configuration Guide - Security
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
radius-server template template-name
The RADIUS server template view is displayed.
Step 3 Run:
radius-server timeout timeout
The timeout interval for a RADIUS server to send response packets is set.
By default, the timeout interval for a RADIUS server to send response packets is five seconds.
To check whether a RADIUS server is available, the S2700 periodically sends request packets
to the RADIUS server. If no response is received from the RADIUS server within the timeout
interval, the S2700 retransmits the request packets.
Step 4 Run:
radius-server retransmit retry-times
The number of times for retransmitting request packets on a RADIUS server is set.
By default, the number of times for retransmitting request packets on a RADIUS server is 3.
After retransmitting request packets to a RADIUS server for the set number of times, the
S2700 considers that the RADIUS server is unavailable.
----End

1.4.10 (Optional) Setting the NAS Port Format of a RADIUS Server

Context
The NAS port format and the NAS port ID format are developed by Huawei, which are used to
maintain connectivity and service cooperation among devices of Huawei. The NAS port format
and NAS port ID format have new and old forms respectively. The ID format of the physical
port that access users belong to depends on the format of the NAS port attribute.
For Ethernet access users:
l
l
For ADSL access users:
Issue 01 (2011-07-15)
NAS port
– New NAS port format: slot number (8 bits) + subslot number (4 bits) + port number (8
bits) + VLAN ID (12 bits).
– Old NAS port format: slot number (12 bits) + port number (8 bits) + VLAN ID (12 bits).
NAS port ID
– New format of NAS port ID: slot=xx; subslot=xx; port=xxx; VLAN ID=xxxx. Where
slot ranges from 0 to 15, subslot 0 to 15, port 0 to 255, and VLAN ID 1 to 4094.
– Old format of NAS port ID: slot number (2 characters) + subslot number (2 bytes) +
card number (3 bytes) + VLANID (9 characters)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 AAA and User Management Configuration
15