Backing Up A Featurekey Using The Web User Interface - RuggedCom RuggedBackbone RX5000 User Manual

2. System Administration
Procedure 2.2. Uploading a Featurekey File
1. Launch a web browser and navigate to your device's IP address. Log in to ROX™. The ROX™
web interface appears.
2. Click the Tools tab and click the CLI link. The CLI screen appears.
3. In Operational mode, at the command line prompt, type the following command:
file scp-featurekey-from-url {username}@{host}:{path}{filename} {filename}
Where:
• {username} is the name of a user who can log in to the computer where you saved the featurekey
file.
• {host} is hostname or IP address of the computer where you saved the featurekey file.
• {path} is the directory path to the featurekey file on the computer.
• {filename} is the name of the featurekey file.
For example:
file scp-featurekey-from-url wsmith@10.200.20.39:/files/keys/1_cmRX1K-12-11-0015.key
1_cmRX1K-12-11-0015.key
4. Type the command with your parameters and press Enter. When prompted, type the user's
password and press Enter. The system uploads the featurekey file:
ruggedcom# file scp-featurekey-from-url wsmith@10.200.20.39:/files/keys/
1_cmRX1K-12-11-0015.key 1_cmRX1K-12-11-0015.key
wsmith@10.200.20.39's password:
1_cmRX1K-12-11-0015.key
ruggedcom#
5. To view the contents of the featurekey file, type the following command:
file show-featurekey {filename}
Where:
• {filename} is the name of the featurekey file.
For example:
file show-featurekey 1_cmRX1K-12-11-0015.key
6. Type the command with your featurekey filename and press Enter. The system displays the
contents of the featurekey file:
ruggedcom# file show-featurekey 1_cmRX1K-12-11-0015.key
GPG_FEATUREKEY_LEVEL=1
GPG_FEATUREKEY_CM_SERIALNUMBER=RX1K-12-11-0015
GPG_FEATUREKEY_SIGNATURE=iEYEABECAAYFAk091pAACgkQP2pya+G5kdZeKACeKdHUB2G1T73Dymq8IjSdYDKAiskAn
3abBpCEhfLXxY2ZlVbvGNwDZow2
ruggedcom#
7.
On the CLI screen, click

2.8.6. Backing Up a Featurekey Using the Web User Interface

Featurekey files can be backed up using the following forms. These forms are accessible from the
admin menu.
To back up a featurekey file, navigate to admin/backup-files. The Backup Files form appears. In the
File type field, select featurekey. Enter additional parameters on the form. On the Backup Files From
Devices form, click the Perform button.
ROX™ v2.2 User Guide
100% 192
Stop to close the CLI session.
55
0.2KB/s 00:00
RuggedBackbone™ RX5000