System Administration; Administration Menu; System Commands; Clear All Alarms Menu Action Form - RuggedCom RuggedBackbone RX5000 User Manual

2. System Administration

2. System Administration
This chapter describes administration-related functions and the Administration menu. Information on
the Administration submenus is found throughout Part 1 of this guide.

2.1. Administration menu

Figure 2.1. Administration menu
The Administration (Admin) menu is accessible from the main menu. Use this menu to link to submenus
related to alarms, DNS, logging, SNMP, authentication, user IDs and passwords, software versions
(upgraded) and netconf.
As well, you can link directly from the Admin menu to commands called "actions"
will clear or acknowledge all alarms, shut down or reboot the system, set the system clock or restore
factory defaults.

2.2. System Commands

This section describes where to find basic system commands using the Administration menu and its
menu actions. The following forms are accessible from the Administration menu.
Figure 2.2. Clear All Alarms Menu Action form
To clear all alarms, click on the clear-all-alarms menu action and then click the Perform button on the
Clear All Alarms form.
Figure 2.3. Acknowledge All Alarms Menu Action form
ROX™ v2.2 User Guide 34
(see below) that
RuggedBackbone™ RX5000