Dhcp Host-Groups; Viewing Active Dhcp Leases - RuggedCom RuggedBackbone RX5000 User Manual

15. DHCP Server
• To set Hardware Configuration, Lease Configuration, and Client Configuration options, navigate to
/services/dhcpserver/host{host id}/options. For more information, see
Configuration", Section 15.2.8.1, "Lease Configuration
Configuration Options at the DHCP
• To set Client Configuration, NIS Configuration, and NetBios Configuration options, navigate to /
services/dhcpserver/host{host id}/options/client. For more information, see
Configuration Options at the DHCP Client
• To set custom DHCP options, navigate to /services/dhcpserver/host{host id}/options/client/custom
and click <Add custom>. For more information, see

15.2.6. DHCP Host-groups

• To view a list of host-groups, navigate to services/dhcpserver/host-groups.
Figure 15.9. Host Group Configuration table
• To add a host-group, enter edit mode, navigate to /services/dhcpserver/host-groups, and click <Add
host-groups>. On the Key settings form, type a name for the host-group and click Add.
You can configure DHCP options at the host-group level. Options set at this level override options set
at higher levels.
• To set Lease Configuration and Client Configuration options, navigate to /services/dhcpserver/host-
groups{host-group id}/options . For more information, see
Options" and Section 15.2.8.2, "Client Configuration Options at the DHCP
• To set Client Configuration, NIS Configuration, and NetBios Configuration options, navigate
to /services/dhcpserver/host-groups{host-group id}/options/client. For more information, see
Section 15.2.8.3, "Client Configuration Options at the DHCP Client
• To set custom DHCP options, navigate to /services/dhcpserver/host-groups{host-group id}/options/
client/custom and click <Add custom>. For more information, see
Options".

15.2.7. Viewing Active DHCP Leases

You can view a list of active DHCP leases. The list includes the start and end times, hardware ethernet
address, and client hostname for each lease.
To view DHCP leases, navigate to services/dhcpserver and click show-active-leases. On the Trigger
Action form, click Perform. The /services/dhcpserver/show-active-leases form appears and displays
the active DHCP leases.
ROX™ v2.2 User Guide
Options", and
Levels".
Level".
Section 15.2.9, "Custom DHCP
Section 15.2.8.1, "Lease Configuration
144
Section 15.2.10, "Hardware
Section 15.2.8.2, "Client
Section 15.2.8.3, "Client
Options".
Levels".
Level".
Section 15.2.9, "Custom DHCP
RuggedBackbone™ RX5000