Shutdown The Device Menu Action Form; Set New Time And Date Form - RuggedCom RuggedBackbone RX5000 User Manual

2. System Administration
To acknowledge all alarms, click on the acknowledge-all-alarms menu action and then click the Perform
button on the Acknowledge All Alarms form.
Figure 2.4. Shutdown the Device Menu Action form
To shut down the device, click on the shutdown menu action and then click the Perform button on the
Shutdown the Device form.
Figure 2.5. Reboot the Device Menu Action form
To reboot the device, click on the reboot menu action and then click the Perform button on the Reboot
the Device form.
Figure 2.6. Set New Time and Date form
The Set New Time and Date form configures the current time and date settings.
Figure 2.7. Set Clock on Target Device form
To set the clock on the target device, click on the setSystemClock menu action, then enter the relevant
time/date information into the Set New Time and Date form. The information must be in the following
format: YYYY-MM-DD HH:MM:SS. After entering this information, click the Perform button on the Set
clock on target device form.
For more detailed information on time synchronization, refer to
ROX™ v2.2 User Guide
Chapter 3, Time
35
Synchronization.
RuggedBackbone™ RX5000