Administrative Access Control - RuggedCom RuggedBackbone RX5000 User Manual

2. System Administration
The current local time

2.3. Administrative Access Control

The following access control forms are accessible from the Administration menu - by clicking on the
main menu under admin.
Figure 2.14. CLI Sessions form
enabled
Synopsis: boolean
Default: true
Provides the ability to configure CLI features on the device.
Listen IP
Synopsis: IPv4 address in dotted-decimal notation
Synopsis: IPv6 address in colon-separated hexadecimal notation
Default: 0.0.0.0
The IP Address the CLI will listen on for CLI requests (default 0.0.0.0).
Listen Port
Synopsis: unsigned short integer
Default: 22
The port on which the CLI listens for CLI requests. The default is port 22.
Extra IP:Ports
Synopsis: A string
Synopsis: "extra-ip-ports" occurs in an array.
The CLI will also listen on these IP Addresses:Port values. Add ':#' to set non-default port value #.
(ie. xxx.xxx.xxx.xxx:19343 [::] [::]:16000)
ROX™ v2.2 User Guide 38 RuggedBackbone™ RX5000