Table of Contents
Advertisement
13. PPP Users
13. PPP Users
13.1. Overview
Use the PPP menu to configure local and remote authentication for PPP user login through an L2TP
client.
A PPP Server can be configured to accept a connection request only after validating the user's
credentials. When so configured, the login credentials can be verified locally based on the information
configured in global/ppp/profiles/dial-in, or can be verified through a remote RADIUS server configured
in global/ppp/radius.
Use the dial-out option to create a profile for users who dial out to a PPP server. In this case, the device
acts as a PPP client.
PPP users, profiles, and settings are configured on forms found under the PPP menu. To display the
PPP menu, navigate to global/ppp.
13.2. PPP Configuration
The PPP menu is accessible from the main menu under admin. The PPP menu provides access to forms
that allow you to add and remove PPP users and profiles and make adjustments to related settings.
Figure 13.1. PPP menu
To display the Dial-in PPP Users table, navigate to global/ppp/profiles/dialin.
Figure 13.2. Dial-in PPP Users table
name
Synopsis: A string
The user ID of the remote client used to be authenticated
password
Synopsis: A string
The password of the remote client used to be authenticated
To display the Dial-in Users form, navigate to global/ppp/profiles/dialin, followed by any of the linked
submenus.
ROX™ v2.2 User Guide
133
RuggedBackbone™ RX5000
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the RuggedBackbone RX5000 and is the answer not in the manual?
Questions and answers