Switching Sidexis 4 To Ready For Exposure State; Switch Sidexis To Ready For Exposure State - Sirona galileos comfort plus Operating Instructions Manual

Sirona Dental Systems GmbH
Operating Instructions GALILEOS Comfort PLUS (CANADA) GALILEOS
64 91 208 D3437
D3437.201.09.07.02 12.2015
7.1.5

Switching SIDEXIS 4 to ready for exposure state

Refer to the SIDEXIS 4 User Manual
http://www.sirona.com/manuals
7.1.6

Switch SIDEXIS to ready for exposure state

● To make the SIDEXIS program on the PC ready for exposure, see
the SIDEXIS operator's manual.
● As long as no connection with SIDEXIS is established, the message
"Switch SIDEXIS to ready for exposure state" is displayed in the
comment line of the Easypad touchscreen.
If you have a GALILEOS with Facescan, you can now select the exposure
Selecting Facescan on the PC
type on a PC in SIDEXIS. The exposure dialog box looks different with
Facescan; see the Facescan Operating Instructions.
Once SIDEXIS is ready for exposure, the welcome screen with the
selected patient data from SIDEXIS appears on the Easypad
touchscreen.
It shows the first name, last name, date of birth, and the card index
number of the patient currently registered in SIDEXIS.
The exposure data program, kV, mAs, and a light blue radiation symbol
are displayed in the upper right corner.
When exposure readiness has been reached, the radiation symbol will
turn yellow.
When you touch the screen, the welcome screen disappears and the
selection screen reappears.
TIP: If you wish to suppress this entire screen display or individual pieces
of information displayed here, your service engineer can disable the
corresponding data upon request.
7 Operation
7.1 Preparing the exposure
47