Turning The System On - Sony PCS-1 Operation Manual

Turning the System On

1
Turn on the TV monitor.
2
Turn on the power of any other equipment to be used for the
videoconference.
3
Set the power switch on the right side of the Communication Terminal to
the on position (
The Communication Terminal turns on after a while. Three indicators on the
front of the Communication Terminal and the POWER indicator on the camera
light, then only the POWER indicators on both units remain on in green. The
launcher menu will appear on the monitor screen and the picture shot by the
local camera will also appear in the launcher menu.
6
GB
Turning the System On
).
@
POWER indicators
Connect
Phone Book
Dial
Menu
Press to show help
IP:0.0.0.0
Video:Main
Camera Unit
Communication Terminal
Power switch
Angle Adj.
ISDN:012345678912
Audio:MIC(INT)+AUX