Turning the Unit On/Off
This section describes how to turn on or off the unit.
Turning On
1
Turn on the TV monitor.
2
Turn on the power of any other equipment to be used for this connection.
3
Press the
The POWER indicator lights when the unit turns on.
The Home menu will appear on the monitor screen and the picture shot by
the local camera will also appear in the Home menu.
Home menu
Home
Camera
Connect
Notes
• After the power is turned on, the camera moves automatically for trial operation. Be
careful not to catch your finger.
• If you use force to prevent the camera from moving, the camera may stop moving and
the picture may not be displayed. In this case, turn off the unit, and turn it on again.
22
Turning the Unit On/Off
1
(power) switch on the unit to turn it on.
AAA
IP:XXX.XXX.XXX.XXX
IP
1
(power) switch
Ready
5/11/2008 13:00
Dial