Turning The System On/Off; Turning On - Sony PCS-1600 Operating Instructions Manual

Turning the System On/Off

This section describes how to turn on and off the Compact
Processor.
Note
Set the CONF/DOC/TV selector on the Remote Commander to
"CONF" when operating the Compact Processor.

Turning On

The following describes how to turn on the Compact Processor.
1
2
3
Make sure the TV monitor is on standby.
For details on how to set the TV monitor into a standby
state, refer to the operating instructions supplied with the
TV monitor.
Turn on the power of any other equipment to be used
during the meeting.
Set the POWER switch on the rear of the Compact
Processor to on.
Soon, the Compact Processor and the TV monitor are
turned on.
The POWER lamps (green) on the camera and the
Compact Processor light up, and the self-diagnostic starts.
The picture shot by the local camera appears on the
monitor screen after the self-diagnostic is completed.
Rear
MIC AUDIO VIDEO
(PLUG IN POWER) IN AUX2
AUX1
IN
1
DC12V 100BASE-TX/ AUDIO OUT
POWER
10BASE-T (MIXED)
1 2
2
OUT AUX OUT MONITOR OUT
POWER switch
Front
ISDN A
IR OUT1 IR OUT2
POWER lamps
Chapter 1 Preparation
21