Dr 19 External Speed - Siemens SIWAREX WT241 Manual

11.20

DR 19 External speed

If the SIWAREX module is not to determine the belt speed because the current speed is
available externally, e.g. in a controller, it can be passed on to the SIWAREX via DR 19. The
current material flow rate can then be calculated.
Procedure
● Enter a value in data record DR 19
● Transfer the data record to the scale
Table 11- 20 Assignment of data record 19
Variable Note
Data record num- Contains no. of data record
ber
Length Data record length information
Application Information about which application the
data record belongs to
Version identifier Information about current data record
version
External speed The externally determined speed can be
value sent to the scale.
Reserve 1 Reserve
Reserve 2 Reserve
SIWAREX WT241
Manual, 05/2015, A5E36046748Aa
Type L Rw Default Min.
USHORT 2 r 19
USHORT 2 r 16
USHORT 2 r 104
USHORT 2 r 1
FLOAT 4 rw 0
SHORT 2 rw 0
USHORT 2 rw 0
Communication
11.20 DR 19 External speed
Max. Regis-
ter
- - 1602
- - 1603
- - 1604
1 65635 1605
- - 1606
0 - 1608
0 - 1609
149