Dr 8 Date And Time - Siemens SIWAREX WT241 Manual

11.11

DR 8 date and time

The weighing module has its own hardware clock. The current date and time are specified by
or read from data record DR 8. The clock is buffered with a capacitor and can continue
operating for up to approximately 70 hours without a supply voltage. If you are using the
Modbus protocol, data record DR 48 must be used for the date and time.
Procedure
● Set the date and time
● Transfer the data record to the scale
Table 11- 11 Assignment of data record 8
Variable Note
Data record Contains no. of data record
number
Length Data record length information
Application Information about which appli-
cation the DR belongs to
Version Information about current data
identifier record version
Date and SIMATIC DTL format
time
SIWAREX WT241
Manual, 05/2015, A5E36046748Aa
Type L Rw
USHORT 2 r
USHORT 2 r
USHORT 2 r
USHORT 2 r
DTL 12 rw
11.11 DR 8 date and time
Default Min. Max.
8 - -
20 - -
104 - -
1 1 65635 1344
DTL#197 - -
0-01-01-
00:00:00.
0
Communication
Register
1341
1342
1343
1345
133