Display L2Vpn Minm Connection - HP FlexFabric 5930 Series Command Reference Manual

all-l2-is: Sets the control MAC address to 0180-C200-0015. This MAC address represents all Level-2
intermediate systems.
all-pb: Sets the control MAC address to 0180-C200-002E. This MAC address represents all provider
bridge intermediate systems.
Usage guidelines
ISIS-SPB uses a group MAC address for ISIS-SPB peer-to-peer communication. This group MAC specifies
the destination MAC address for ISIS-SPB protocol frames.
Vendors might use different group MAC addresses. You can change the ISIS-SPB control MAC for
interoperability in a multivendor network.
Examples
# Set the group MAC address for ISIS-SPB to 0900-2B00-0005 (all-is).
<Sysname> system-view
[Sysname] spbm
[Sysname-spbm] control-address all-is

display l2vpn minm connection

Use display l2vpn minm connection to display MAC-in-MAC connections.
Syntax
display l2vpn minm connection [ vsi vsi-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsi vsi-name: Specifies a VSI name, a case-sensitive string of 1 to 31 characters. If you do not specify a
VSI, the command displays MAC-in-MAC connections for all VSIs.
Examples
# Display MAC-in-MAC connections for all VSIs.
<Sysname> display l2vpn minm connection
Total number of MinM connections: 6
Types: MC - multicast, UC - unicast
VSI name: 1
Link ID I-SID
64 10001
65 10001
- 10001
VSI name: 2
Link ID I-SID
68 10002
BMAC BVLAN
9999-8888-7777 1234
9999-8988-7777 1234
0011-2222-3333 1234
BMAC BVLAN
9999-8888-7777 1234
Owner Type Interface
SPB UC FGE1/0/1
SPB UC FGE1/0/1
SPB MC FGE1/0/1
Owner Type Interface
SPB UC FGE1/0/1
7