General Settings - Polycom RMX 1000 User Manual

Figure 4-3

General Settings

On the New Profile page, click the General tab to display the interface for
configuring general parameters, as shown in the figure above. The table
below explains the detailed meanings of profile parameters.
Table 4-2
Parameter
Display Name
Line Rate
Encryption
Auto Mute
Auto Terminate
Minimum ports to be
Defining a Profile
General Parameters
Description
Enter a unique name to identify this profile.
Note: This is the only mandatory parameter when you
create a new profile.
Select the conference line rate. Line rate indicates the rate
that integrates video, audio, and data contents. The default
value is 768Kbps.
Set whether to enable the AES encryption function for this
profile.
Note:
If any conference uses the profile with AES encryption
enabled, an endpoint that does not support the
encryption capability cannot join in the conference
through the PCM (Personal Conference Manager).
Endpoints can access the conference only by directly
calling the RMX 1000 E.164 + conference ID.
The RMX 1000 version for some geographic areas may
not allow for the encryption option.
If this check box is selected, after an endpoint dials into the
conference, the RMX 1000 will automatically mute it.
If this check box is selected, the system will automatically
terminate the conference when any of the following
conditions is satisfied:
Before First Join - No participant joins in within the set
time after the conference starts. The default idle time is
10 minutes.
After Last Quit - All participants have quit the conference,
and the conference is idle for the predefined time. The
default idle time is 1 minute.
This check box is selected by default.
Set the minimum number of conference participants.
Polycom RMX 1000 User Guide
4-3