Starting A Conference - Polycom RMX 1000 User Manual

Figure 3-4
Right-click Shortcut Menu
The Web interface provides right-click shortcut menus for common
operations such as viewing detailed parameters, creating/deleting items, etc.
Alternatively, you can perform these operations by double-clicking the
corresponding list items or by using the corresponding buttons on the toolbar
of the pane.
Pane Sizing
Move the mouse pointer to the border of the pane; when the pointer turns
into an arrow, drag to size the pane while holding down the left mouse
button.
Confirm/Cancel
To confirm your settings on the parameter configuration interface, click the OK
button in the lower part of the interface. To abort your settings, click the
Cancel button.

Starting a Conference

There are several ways to start a conference with the RMX 1000:
•
•
•
•
List Sorting
Click the New Conference button in the Conferences pane.
Directly enter the dialing number, including a new conference ID,
through the remote control.
Dial into a meeting room.
in the MCU, without occupying any resources. It remains in passive
mode until it is activated by the first participant. For more information
about Meeting Rooms, see Meeting Room.
Reserve a conference (optional): The reserved conference is stored at the
MCU and reserves system resources for the call's specified time. The
Polycom RMX 1000 User Guide
A Meeting Room is a conference that is saved
3-5