Obtaining Product Activation Key - Polycom RMX 1000 User Manual

Chapter 2- First Time Installation and Configuration
•
•

Obtaining Product Activation Key

Before using the RMX 1000, you need to register and activate the device.
Follow the procedure below to obtain the product activation key. When you
power on and log in to the RMX 1000 for the first time, the system displays
the Product Activation dialog box, requesting you to enter a Product
Activation Key.
1
2
3
Figure 2-1
2-2
The IP address, subnet mask, and default gateway IP address of the RMX
1000 LAN port
(Optional) Gatekeeper address, and the H.323 prefix and E.164 number
to be assigned to the RMX 1000
Enter http://portal.polycom.com in the address bar of the browser to
access the login page of the Polycom resource center.
In the login box, enter your Email address and password, and then click
Sign In. If you are a new user, click the Register for an Account link for
registration.
Click Service & Support in the upper navigation bar on the interface. On
the Service & Support page, click Product Activation in the left navigation
bar.
Service & Support Page