Polycom RMX 1000 User Manual page 93

Chapter 12 - IVR Service
Figure 12-6
7
Figure 12-7
8
9
10 In the Save in field, select the directory where the file will be stored.
11 In the Save as Type field, select the *.wav file format.
12 In the File name box, type a name for the message file, and then click the
To record additional messages, repeat steps 1 to 10.
12-6
Save the Recorded Message
Verify that the Format reads: PCM 16.000 kHz, 16Bit, Mono. If the
format is correct, continue with step 10. If the format is incorrect, click
the Change button.
The Sound Selection dialog box appears.
Sound Selection Dialog Box
In the Name field, select the name of the format created in step 7, as
shown in Figure 12-5.
Click OK.
The system returns to the Save As dialog box.
Save button.