Signaling And Hardware Monitoring; Signaling Monitoring - Polycom RMX 1000 User Manual

Signaling and Hardware
Monitoring

Signaling Monitoring

To monitor the LAN port connection status and gateway registration
information of the device you are using, click Signaling Monitor in the RMX
Management pane. The signaling status list will be displayed in the list pane
on the right side.
Figure 15-1
The LAN1 and LAN2 ports may be in one of the following three states:
•
•
•
The gatekeeper may be in one of the following four states:
•
•
Signaling Monitor Pane
Link up: Connected
Link down: Disconnected
Disabled: Port disabled
Registered: Registered with the gatekeeper
Unregistered: Not registered with the gatekeeper
15
15-1