Network Setting - Polycom RMX 1000 User Manual

Parameter
-n<count>
-w<time>
-l<size>
[Example] Send the host whose IP address is 172.21.100.111 a Ping packet
with the size of 1500 bytes for five times cyclically. The wait time is 1000 ms:

Network Setting

Enter the following commands after the prompt "#" to set network
configurations:
"set {lan1 | lan2} ip {dhcp | static <ip> netmask <mask> gw <gateway>}" -
set the IP address for LAN 1 or LAN 2.
"set {lan1 | lan2} speed {auto | 1000 | 100 full | 100 half | 10 full | 10 half}"
- set the connection features for the LAN 1 or LAN2 interface.
Table 18-3 Network Setting Parameters – LAN Interface IP Address
Parameter Description
Automatically gets the address information through the DHCP
dhcp
server.
Specifies the static IP address information -
Ip: IP address of the network port
static
mask: subnet mask of the network port
gateway: gateway address of the network port
Table 18-4 Network Setting Parameters – LAN Interface Connection Rate
Parameter Description
auto Auto negotiation mode
1000 1000Mbps
100 full 100Mbps full duplex
100 half 100Mbps half duplex
Description
Packet sending times, defaulted to 10
Waiting time, defaulted to 1000 ms
Size of the sent packet, defaulted to 32 bytes
Polycom RMX 1000 User Guide
18-5