Command Introduction - Polycom RMX 1000 User Manual

Chapter 18 - Appendix B: Telnet/Terminal Commands
If you entered a wrong password, you may be required to re-login to the
system.
If you entered the right password, you will be brought directly to the
command setting interface.

Command Introduction

Help
After logging into the system, you may enter ? or help after the prompt "#" to
show the command prompt information.
Exit
Enter exit after the prompt "#" to exit the command control interface.
View Device Information
Enter show after the prompt "#" to view the current device information,
including system information, license information, interface information, and
IP address information.
18-2
•
"<>" indicates an optional parameter
•
"{}" indicates a required parameter
•
"|" indicates a 1-out-of-N parameter