Grizzly G0764Z Owner's Manual page 75

Replacing Main Motor Belt
A V-belt transfers power from the main motor to
the main blade.
Tool Needed
Wrench 22mm ................................................... 1
To replace main motor belt:
1.
DISCONNECT MACHINE FROM POWER!
2.
Open cabinet door and locate motor adjust-
ment lever shown in Figure 148.
Pulley
Belt
Adjustment
Lever
Figure 148. Main motor V-belt tension controls
(table removed for photo clarity).
Model G0764Z (Mfd. Since 10/15)
3.
Qty
Cam Lock
Figure 149. Rotating motor position using motor
4.
5.
6.
Rotate adjustment lever counterclockwise
to raise motor and release belt tension (see
Figure 149). The cam will lock the motor in
place.
adjustment lever.
Carefully position belt onto desired pulleys
(see Change Speed on Page 49 for addi-
tional information).
Rotate adjustment lever clockwise to lower
motor and retension belt.
Note: The cam lock will automatically posi-
tion motor for correct belt tension.
Close cabinet door before reconnecting
machine to power.
Adjustment
Lever
-73-