Grizzly G0764Z Owner's Manual page 32

24. Insert arbor locking pin into access hole
shown in Figure 37.
Note: Main blade is shown here only for illus-
trative purposes.
Arbor
Nut
Figure 37. Loosening main blade arbor nut.
25. Push down on locking tool with one hand as
you rotate arbor nut clockwise with wrench.
This will force blade locking tool into arbor
indent and prevent arbor from rotating in next
steps.
26. Continue unthreading arbor nut clockwise (it
has left-hand threads) until you can remove
flange (see Figure 38).
Arbor Nut
Flange
Figure 38. Main blade arbor parts and tools for
changing blade.
-30-
Main Arbor
Access Hole
Wrench
Arbor Locking Pin
Before proceeding with the next steps, wear
gloves to protect your hands when handling
and installing the blade.
27. Slide main blade (not included) over arbor
with teeth facing to the right, then install
flange (see Figure 39).
Upper Teeth
Facing Right
Flange
Arbor
Nut
Figure 39. Main blade component assembly.
28. Thread arbor nut on counterclockwise and
fully tighten it to secure the blade (see Figure
40).
Figure 40. Main blade installed on arbor.
Model G0764Z (Mfd. Since 10/15)
Arbor