Grizzly G0764Z Owner's Manual page 54

6. Slide arbor wrench behind scoring blade (see
Figure 93) to prevent blade from spinning.
Scoring Blade
Hex Bolt
Figure 93. Inserting arbor wrench behind scoring
blade to prevent blade from spinning.
7.
Use 19mm wrench to unthread arbor hex bolt
counterclockwise (left-hand threads), and
remove arbor hex bolt, flange, and blade (see
Figure 94).
Arbor
Wrench
19mm Wrench
Figure 94. Scoring blade, flange, arbor hex bolt,
19mm wrench, and arbor wrench.
-52-
8.
9.
Arbor
Wrench
Figure 95. Scoring blade order of assembly.
10. Adjust scoring blade to main blade, as
Hex Bolt
Flange
Slide replacement scoring blade over arbor
with teeth facing to the left, then replace
flange.
Thread arbor hex bolt on clockwise and fully
tighten it to secure the assembly (see Figure
95 for order of assembly).
instructed in the next subsection.
Model G0764Z (Mfd. Since 10/15)