Grizzly G0764Z Owner's Manual page 50

Crosscut blade features:
• Best for cutting across the grain
• 80–100 teeth
• Alternate top bevel tooth profile
• Small hook angle and a shallow gullet
Figure 83. Crosscutting blade.
Combination blade features:
• Designed to cut both with and across grain
• 50–80 teeth
• Alternate top bevel and flat, or alternate top
bevel and raker tooth profile
• Teeth are arranged in groups
• Gullets are small and shallow (similar to a
cross-cut blade), then large and deep (similar
to a ripping blade
Figure 84. Combination blade.
-48-
Alternate
Top
Bevel
Alternate
Top
Bevel
and
Flat
Laminate blade features:
• Best for cutting plywood or veneer
• 100–120 teeth
• Triple chip tooth profile
• Very shallow gullet
Figure 85. Laminate blade.
Thin Kerf Blade: A blade with thinner kerf than
a standard blade. Since the spreader/riving knife
included with this table saw is sized for standard
blades, thin kerf blades cannot be used on this
saw.
Model G0764Z (Mfd. Since 10/15)
Triple
Chip
Blade