Grizzly G0764Z Owner's Manual page 58

Positioning Crosscut Table Along
Sliding Table
The crosscut table can be positioned as neces-
sary along the sliding table (see Figure 104).
Figure 104. Crosscut table positions along
sliding table.
To position crosscut table along sliding table:
1. DISCONNECT MACHINE FROM POWER!
2. Use sliding table lock lever (see Figure 105)
to secure table in position.
Figure 105. Location of sliding table lock lever.
-56-
Sliding Table
Lock Lever
3. Loosen crosscut table lock lever shown in
Figure 106.
Figure 106. Location of crosscut table lock lever.
4.
Position crosscut table along sliding table
T-slot to desired position, then retighten lock
lever to secure table.
Model G0764Z (Mfd. Since 10/15)
Lock Lever