Grizzly G0764Z Owner's Manual page 37

51. Tighten jam nut against bracket (see Figure
53) to secure arm-leveling bolt.
52. Secure arm-support base with (2) M20-2.5
hex nuts and (2) 20mm fender washers (see
Figure 53).
M20-2.5 Hex Nut
w/Fender Washer
(1 of 2)
Figure 53. Securing arm support base.
53. Install arm-support pedestal onto arm-support
base, using (4) M8-1.25 x 25 cap screws, (4)
8mm lock washers, and (4) 8mm flat washers
(see Figure 54).
Figure 54. Installing arm-support pedestal.
Model G0764Z (Mfd. Since 10/15)
Bracket
Jam Nut
Arm-Leveling
Bolt
Arm-Support
Pedestal
x 4
54. Insert upper support arm through top of arm-
support pedestal, as shown in Figure 55.
55. Install (1) M10-1.5 x 30 hex bolt into location
shown in Figure 55. Do not tighten yet.
Upper
Top of Arm
Support Arm
Support Pedestal
Figure 55. Installing upper support-arm.
56. Install dust hose coupler onto upper support
arm, using (2) M6-1 x 12 button head cap
screws, (2) 6mm lock washers, and (2) 6mm
fender washers (see Figure 56).
Dust Hose Coupler
Figure 56. Installing dust hose coupler.
x 1
x 2
-35-