Grizzly G0764Z Owner's Manual page 31

19. Insert studs into tables as shown in Figure 33,
and re-install hardware removed in Step 20.
Figure 33. Installing the rip fence rail.
20. Slide rip fence base onto fence rail as shown
in Figure 34.
21. Thread (2) M10-1.5 x 12 lock handles and
M10-1.5 x 70 lock knob bolt into rip fence
base, as shown in Figure 34.
Fence Base
Knob
Bolt
Figure 34. Rip fence attached with lock handles
and lock knob installed.
Model G0764Z (Mfd. Since 10/15)
22. Slide rip fence onto clamping plate, as shown
Fence
Figure 35. Rip fence attached to rip fence base.
23. Move sliding table all the way forward to
Figure 36. Location of magnetic catches that
Lock
Handles
The Model G0764Z does not ship with a 14"
main blade. Refer to Blade Requirements
and Blade Selection beginning on Page 47
when purchasing the main blade.
in Figure 35, and lock it with slide lock
handle.
Rip
Clamping
Plate
expose blade cover. Pull blade cover toward
front of machine to disengage magnetic
catches (see Figure 36).
secure blade cover.
Slide Lock
Handle
Magnetic Catch
(1 of 2)
-29-