Siemens SIMOREG DC Master 6RA7028-6DS22 Operating Instructions Manual page 547

02.00
Connector Description
4-step master switch
K0510 Setpoint of the 4-step master switch
General connectors
K0800 Operating status (code number) with one decimal place
K0810 Limiting bits
K0900 Optimization run, setpoint 0
K0901 Optimization run, setpoint 1
K0902 Optimization run, setpoint 2
Optimization run, setpoint 3
K0903
Optimization run, setpoint 4
K0904
Time interval between averaged line synchronization time reference point
K0960
and "unfiltered" zero crossing of scanned and software-filtered line voltage
in 1.334 µs (when P152 = 1 to 20)
Positive line zero crossing of phase U-V (as T1 instant)
K0970
Negative line zero crossing of phase W-U (as T1 instant)
K0971
Positive line zero crossing of phase V-W (as T1 instant)
K0972
K0973 Negative line zero crossing of phase U-V (as T1 instant)
K0974 Positive line zero crossing of phase W-U (as T1 instant)
K0975 Negative line zero crossing of phase V-W (as T1 instant)
K0976 Positive line zero crossing, field supply
Negative line zero crossing, field supply
K0977
Last line zero crossing used (as T1 instant) (field)
K0984
Field firing instant (as T1 instant)
K0985
Last line zero crossing used (as T1 instant) (armature)
K0986
K0987 Armature firing instant (as T1 instant)
K0988 Firing pulse cycle time (time difference between current and previous
armature firing instant) in T1 increments of 1.334 µs each
SIEMENS AG 6RX1700-0AD76
SIMOREG DC Master Operating Instructions
Connectors and binectors
Normalization
[SW 1.7 and later]
∧ 100%
=
16384
∧ 1,334 µs
=
1
Function
diag., Sheet
G125
12-7