AudioCodes Mediant 800B User Manual page 847

User's Manual
Parameter
CLI: reject-cancel-after-
connect
[RejectCancelAfterConnec
t]
Web: Verify Received
RequestURI
CLI: verify-rcvd-requri
[VerifyReceevedRequestU
ri]
Web: Max Number of Active
Calls
EMS: Maximum Concurrent
Calls
CLI: max-nb-of--act-calls
[MaxActiveCalls]
Web: Number of Calls Limit
[IpProfile_CallLimit,]
Web: QoS statistics in SIP
Release Call
[QoSStatistics]
Version 6.8
call.

[0] = (Default) Accepts the CANCEL, by responding with a 200 OK
and terminating the call session.

[1] = Rejects the CANCEL, by responding with a SIP 481
Call/Transaction Does Not Exist, and maintaining the call session.
Enables the device to reject SIP requests (such as ACK, BYE, or re-
INVITE) whose user part in the Request-URI is different from the user
part received in the Contact header of the last sent SIP request.

[0] Disable = (Default) Even if the user is different, the device
accepts the SIP request.

[1] Enable = If the user is different, the device rejects the SIP
request (BYE is responded with 481; re-INVITE is responded with
404; ACK is ignored).
Defines the maximum number of simultaneous active calls supported
by the device. If the maximum number of calls is reached, new calls
are not established.
The valid range is 1 to the maximum number of supported channels.
The default value is the maximum available channels (i.e., no
restriction on the maximum number of calls).
Defines the maximum number of concurrent calls per IP Profile (see
''Configuring IP Profiles'' on page 323).
Enables the device to include call quality of service (QoS) statistics in
SIP BYE and SIP 200 OK response to BYE, using the proprietary SIP
header X-RTP-Stat.

[0] = Disable (default)

[1] = Enable
The X-RTP-Stat header provides the following statistics:

Number of received and sent voice packets

Number of received and sent voice octets

Received packet loss, jitter (in ms), and latency (in ms)
The X-RTP-Stat header contains the following fields:

PS=<voice packets sent>

OS=<voice octets sent>

PR=<voice packets received>

OR=<voice octets received>

PL=<receive packet loss>

JI=<jitter in ms>

LA=<latency in ms>
Below is an example of the X-RTP-Stat header in a SIP BYE message:
BYE sip:302@10.33.4.125 SIP/2.0
Via: SIP/2.0/UDP
10.33.4.126;branch=z9hG4bKac2127550866
Max-Forwards: 70
From:
<sip:401@10.33.4.126;user=phone>;tag=1c2113553324
To: <sip:302@company.com>;tag=1c991751121
Call-ID: 991750671245200001912@10.33.4.125
CSeq: 1 BYE
X-RTP-Stat:
847
57. Configuration Parameters Reference
Description
Mediant 800B Gateway and E-SBC