AudioCodes Mediant 800B User Manual page 582

The following procedure describes how to configure the SBC Alternative Routing Reasons
table in the Web interface. You can also configure this table using the table ini file
parameter, SBCAlternativeRoutingReasons or CLI command, configure voip > sbc routing
sbc-alt-routing-reasons.

To configure SIP reason codes for alternative IP routing:
1. Open the SBC Alternative Routing Reasons page (Configuration tab > VoIP menu >
SBC > Routing SBC > Alternative Routing Reasons).
2. Click Add; the following dialog box appears:
Figure 29-10: Alternative Routing Reasons Table - Add Record
3. Configure a SIP response code for alternative routing according to the parameters
described in the table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 29-7: SBC Alternative Routing Reasons Table Parameter Descriptions
Parameter
Index
[SBCAlternativeRoutingReasons_Index]
Release Cause
CLI: rel-cause
[SBCAlternativeRoutingReasons_ReleaseCause]
User's Manual
Mediant 800B Gateway and E-SBC
Description
Defines an index number for the new table
record.
Defines a SIP response code for triggering the
device's alternative routing mechanism.
582 Document #: LTRT-10620