AudioCodes Mediant 800B User Manual page 443

User's Manual
The device also supports "double call hold" for FXS interfaces where the called party,
which has been placed on-hold by the calling party, can then place the calling party on hold
as well and make a call to another destination. The flowchart below provides an example of
this type of call hold:
The flowchart above describes the following "double" call-hold scenario:
1. A calls B and establishes a voice path.
2. A places B on hold; A hears a dial tone and B hears a held tone.
3. A calls C and establishes a voice path.
4. B places A on hold; B hears a dial tone.
Version 6.8
Figure 26-1: Double Hold SIP Call Flow
443
26. Configuring Supplementary Services
Mediant 800B Gateway and E-SBC