Saving Current Configuration To A File And Sending It To Remote Destination - AudioCodes Mediant 800B User Manual

Analog & digital voip media gateway

Hide thumbs Also See for Mediant 800B:

Table of Contents

User's Manual

Saving Current Configuration to a File and

Sending it to Remote Destination

You can save (create) the current configuration as a configuration file on the device's flash

memory and then have it sent it to a user-defined URL of a remote server (TFTP or

HTTP/S) or to a USB storage device plugged into the device. The configuration settings in

the file are based only on CLI commands. This is done through CLI:

Creating a Configuration file and saving it on a remote server:

# write-and-backup to <URL path with file name>

For example:

# write-and-backup to tftp://192.168.0.3/config-device1.txt

Creating a Configuration file and saving it on a USB stick plugged into the device:

# write-and-backup to usb:///<file name>

For example:

# write-and-backup to usb:///config-device1.txt

44. Saving Current Configuration to a File and Sending it to Remote Destination

Mediant 800B Gateway and E-SBC