AudioCodes Mediant 800B User Manual page 587

User's Manual
Parameter
Manipulation Purpose
CLI: purpose
[IPInboundManipulation_Manipula
tionPurpose]
Source IP Group ID
CLI: src-ip-group-id
[IPInboundManipulation_SrcIpGro
up]
Source Username Prefix
CLI: src-user-name-prefix
[IPInboundManipulation_SrcUsern
amePrefix]
Source Host
CLI: src-host
[IPInboundManipulation_SrcHost]
Destination Username Prefix
CLI: dst-user-name-prefix
[IPInboundManipulation_DestUser
namePrefix]
Destination Host
CLI: dst-host
[IPInboundManipulation_DestHost
]
Request Type
CLI: request-type
[IPInboundManipulation_Request
Type]
Version 6.8
Defines the purpose of the manipulation:

[0] Normal = (Default) Inbound manipulations affect the
routing input and source and/or destination number.

[1] Routing input only = Inbound manipulations affect the
routing input only, retaining the original source and
destination number.

[2] Shared Line = Used for the Shared-Line Appearance
feature. This manipulation is for registration requests to
change the destination number of the secondary extension
numbers to the primary extension. For more information,
see ''BroadSoft's Shared Phone Line Call Appearance for
SBC Survivability'' on page 549.
Defines the IP Group from where the incoming INVITE is
received.
The default is -1 (i.e., any IP Group).
Defines the prefix of the source SIP URI user name (usually in
the From header).
The default is the asterisk (*) symbol (i.e., any source
username prefix).
Note: The prefix can be a single digit or a range of digits. For
available notations, see ''Dialing Plan Notation for Routing and
Manipulation'' on page 781.
Defines the source SIP URI host name - full name (usually in
the From header).
The default is the asterisk (*) symbol (i.e., any host name).
Defines the prefix of the destination SIP URI user name,
typically located in the Request-URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination
username prefix).
Note: The prefix can be a single digit or a range of digits. For
available notations, see ''Dialing Plan Notation for Routing and
Manipulation'' on page 781.
Defines the destination SIP URI host name - full name,
typically located in the Request-URI and To headers.
The default is the asterisk (*) symbol (i.e., any destination host
name).
Defines the SIP request type to which the manipulation rule is
applied.

[0] All = (Default) All SIP messages.

[1] INVITE = All SIP messages except REGISTER and
SUBSCRIBE.

[2] REGISTER = Only REGISTER messages.

[3] SUBSCRIBE = Only SUBSCRIBE messages.

[4] INVITE and REGISTER = All SIP messages except
SUBSCRIBE.

[5] INVITE and SUBSCRIBE = All SIP messages except
REGISTER.
587
29. SBC Configuration
Description
Mediant 800B Gateway and E-SBC