AudioCodes Mediant 800B User Manual page 717

User's Manual
Column Name
Connectivity
Method
Connectivity
Status
Quality Status
Quality Info.
DNS Status
Version 6.8
The method according to which the destination IP address is queried
periodically (SIP OPTIONS request).
The status of the IP address' connectivity according to the method in the
'Connectivity Method' field.

OK = Remote side responds to periodic connectivity queries.

Lost = Remote side didn't respond for a short period.

Fail = Remote side doesn't respond.

Init = Connectivity queries not started (e.g., IP address not resolved).

Disable = The connectivity option is disabled, i.e., parameter 'Alt Routing Tel
to IP Mode' (AltRoutingTel2IPMode ini) is set to 'None' or 'QoS'.
Determines the QoS (according to packet loss and delay) of the IP address.

Unknown = Recent quality information isn't available.

OK

Poor
Notes:

This parameter is applicable only if the parameter 'Alt Routing Tel to IP
Mode' is set to 'QoS' or 'Both' (AltRoutingTel2IPMode = 2 or 3).

This parameter is reset if no QoS information is received for 2 minutes.
Displays QoS information: delay and packet loss, calculated according to
previous calls.
Notes:

This parameter is applicable only if the parameter 'Alt Routing Tel to IP
Mode' is set to 'QoS' or 'Both' (AltRoutingTel2IPMode = 2 or 3).

This parameter is reset if no QoS information is received for 2 minutes.
DNS status can be one of the following:

DNS Disable

DNS Resolved

DNS Unresolved
Description
717 Mediant 800B Gateway and E-SBC
49. VoIP Status