Isdn Bri Parameters - AudioCodes Mediant 800B User Manual

Parameter
57.10.5.13

ISDN BRI Parameters

The automatic dialing upon off-hook parameters are described in the table below.
Parameter
BRI-to-SIP Supplementary Services Codes for Call Forward
Note: Upon receipt of an ISDN Facility message for call forward from the BRI phone, the device
sends a SIP INVITE to the softswitch with a user-defined code in the SIP To header, representing the
reason for the call forward. For more information on BRI call forwarding, see ''BRI Call Forwarding'' on
page 450.
Web/EMS: Call Forward
Unconditional
[SuppServCodeCFU]
Web/EMS: Call Forward
Unconditional Deactivation
[SuppServCodeCFUDeact]
Web: Call Forward on Busy
EMS: Code Call Forward on
Busy
[SuppServCodeCFB]
Web: Call Forward on Busy
Deactivation
EMS: Code Call Forward on
Busy Deactivation
[SuppServCodeCFBDeact]
Web: Call Forward on No
Reply
EMS: Code Call Forward on
No Reply
[SuppServCodeCFNR]
Call Forward on No Reply
Deactivation
EMS: Code Call Forward on
No Reply Deactivation
[SuppServCodeCFNRDeact]
User's Manual
E911 lines to the Public Safety Answering Point (PSAP), according to the
Bellcore GR-350-CORE standard (refer to the ini file parameter
Enable911PSAP).
The valid range is 0 to 4,294,967,295. The default is 200.
Notes:

This parameter is applicable to FXS and FXO interfaces.

For this parameter to take effect, a device reset is required.
Table 57-54: Automatic Dialing Parameters
Defines the prefix code for activating Call Forward Unconditional sent
to the softswitch.
The valid value is a string. By default, no value is defined.
Note: The string must be enclosed in single apostrophe (e.g., '*72').
Defines the prefix code for deactivating Call Forward Unconditional
Deactivation sent to the softswitch.
The valid value is a string. By default, no value is defined.
Note: The string must be enclosed in single apostrophe (e.g., '*72').
Defines the prefix code for activating Call Forward on Busy sent to
the softswitch.
The valid value is a string. By default, no value is defined.
Note: The string must be enclosed in single apostrophe (e.g., '*72').
Defines the prefix code for deactivating Call Forward on Busy
Deactivation sent to the softswitch.
The valid value is a string. By default, no value is defined.
Note: The string must be enclosed in single apostrophe (e.g., '*72').
Defines the prefix code for activating Call Forward on No Reply sent
to the softswitch.
The valid value is a string. By default, no value is defined.
Note: The string must be enclosed in single apostrophe (e.g., '*72').
Defines the prefix code for deactivating Call Forward on No Reply
Deactivation sent to the softswitch.
The valid value is a string. By default, no value is defined.
Note: The string must be enclosed in single apostrophe (e.g., '*72').
938
Mediant 800B Gateway and E-SBC
Description
Description
Document #: LTRT-10620