To Review//Modify/Delete Sunrise/Sunset Times - Tork DZS200 Installation & Operation Manual

Microprocessor based time switch, astronomic
Table of Contents

Advertisement

information. Press ENTER to store the new informa-
tion. When finished, the next holiday, if any, will be dis-
played and RVU will flash again. Modify other holidays
in a similar fashion.
Press RUN/SET to quickly exit to the Run mode.
11.0 TO REVIEW / MODIFY / DELETE SUNRISE OR
SUNSET TIMES
NOTE: THE SUNRISE AND SUNSET TIMES CAN BE
REVIEWED IN THE SCH / RVU MODE BUT CANNOT
BE ALTERED OR DELETED IN THIS MODE.
Press the RUN/SET key once if in the Run mode or
twice if in another mode. The TIME/DAY symbol will
flash. Press ADVANCE to go to the LATITUDE mode if
you want to modify or delete the latitude or astro days.
If you desire to modify the offset times only, go to the
Sunset or Sunrise mode as needed. (See "-modify off-
set minutes" below.)
Press ENTER while the LATITUDE symbol is flashing.
The latitude degrees will start to flash. Use the
ADVANCE key to modify the setting. Press ENTER.
TIME/DAY
29
SIG. TIMER
SCH/RVU
Channel 1 (C1) is flashing. Press ENTER to select it or
ADVANCE to flash channel (C2). Press ENTER.
- review
The previously selected days are showing and the bar
under Sunday is flashing. If no change is desired,
press the RUN/SET key to quickly exit to the Run
mode.
SU MO TU WE TH FR SA H1 H2
DATE
SCH.
ON
OFF
SIGNAL
A
B
SET
28
HOLIDAY
LATITUDE
SUNSET
SUNRISE

Advertisement

Table of Contents
loading

Table of Contents