To Set Signal Duration - Tork DZS200 Installation & Operation Manual

the "OFF", press ADVANCE to move it to "ON".)
Press ENTER. The bar under Sunday flashes again.
The first setting is entered into memory. You can now
program the others in a similar fashion. Press
RUN/SET when finished to go to the RUN mode.

5.0 TO SET SIGNAL DURATION

NOTE: If a channel is to be used as a signal timer,
set the signal duration first. If any regular
ON/OFF schedules had been entered, you
must delete them.
From the RUN mode, press the RUN/SET key. The
TIME/DAY symbol is flashing. Press ADVANCE until
the SIG. TIMER symbol is flashing. The display shows
TIME/DAY
12
SIG. TIMER
SCH/RVU
Press ENTER.
"t1" is flashing. If signal output is desired on channel 1
press ENTER while this is flashing. If channel 2 is
desired as a signal timer, press ADVANCE to flash "t2"
then press ENTER.
TIME/DAY
13
SIG. TIMER
SCH/RVU
A bar appears over SIG. A and the left pair of digits are
flashing. Press ADVANCE to set the signal duration
desired for the channel (1-99 secs.) Press ENTER.
A bar appears over SIG. B and the right pair of digits
are flashing. If you desire a second signal duration for
the channel, press ADVANCE to set it and then press
SU MO TU WE TH FR SA H1 H2
DATE
SCH. ON OFF
SIGNAL A B
SU MO TU WE TH FR SA H1 H2
DATE
SCH. ON OFF
SIGNAL A B
SET
SET
14
HOLIDAY
LATITUDE
SUNSET
SUNRISE
HOLIDAY
LATITUDE
SUNSET
SUNRISE