Table of Contents
Advertisement
10.0 TO ADD / REVIEW / DELETE / MODIFY
HOLIDAYS
From the Run mode, press the RUN/SET key. The
TIME/DAY symbol is flashing. Press ADVANCE to go
to the HOLIDAY mode. When the HOLIDAY symbol is
flashing, press ENTER. H1 is flashing. If you desire
single-day holidays, press ENTER to select it. If not,
press ADVANCE to flash H2 (block holiday). Press
ENTER.
TIME/DAY
28
DATE
SIG. TIMER
SCH/RVU
RVU will flash. If RVU is not flashing, then no holiday
of the selected type (H1 or H2) has been programmed.
Go to section 7 to program holidays.
- add
Press ADVANCE if you want to add more holidays
without reviewing. The dashes for month will flash.
Proceed as outlined in section 7.0.
- review
To review the holidays, press ENTER while RVU is
flashing. Each holiday will be displayed in sequence.
After the last holiday, the HOLIDAY symbol will again
flash.
- delete
To delete a holiday setting, press ADVANCE while the
holiday is being displayed and RVU is flashing. DLT
will begin to flash. Press ENTER. The holiday will be
deleted and the next one, if any, will be displayed.
Delete other holidays in the same way.
- modify
To modify a holiday setting, press ADVANCE two
times while the holiday is showing and RVU is flashing.
The month will begin to flash and RVU will stop flash-
ing. Use the ADVANCE key to modify the flashing
SU MO TU WE TH FR SA H1 H2
SCH.
ON
OFF
SIGNAL
A
B
RVU
SET
27
HOLIDAY
LATITUDE
SUNSET
SUNRISE
Hide quick links:
Advertisement
Table of Contents
