Table of Contents
Advertisement
The dashes for the start month of the block (St) is
flashing. Press ADVANCE to set the start month for
the block. Press ENTER.
The start date is flashing. Press ADVANCE to set the
block start date. Press ENTER. The display shows
TIME/DAY
25
SIG. TIMER
SCH/RVU
This is the screen to set the end date for the block. The
left dashes are flashing. Press the ADVANCE key to
set the end month. Press ENTER.
The end date is flashing. Press the ADVANCE key to
set the end date. Press ENTER.
The start screen is again showing. You can now pro-
gram the next block holiday as before.
When all desired blocks are programmed and you
want to exit the mode, press RUN/SET to quickly exit
to the Run mode.
NOTE 1: Only 5 block dates are possible. The 6th
date is for the daylight savings time. (You
will see a bar over the ON or OFF when in
this position.)
2: All blocks must fall in the same calendar
year. If you have to extend a holiday into a
new year you have to divide it into 2 blocks.
End the first block on December 31 and
start the second block on January 1. -
Example: To program a block from Dec. 23
to Jan. 2.
3: Single-day holidays (H1) will take priority
over block holidays (H2) if they both occur
on the same date.
4: It is NOT possible to program different
schedules for each block holiday. All blocks
are selected together when H2 is selected.
SU MO TU WE TH FR SA H1 H2
DATE
SCH.
ON
OFF
SIGNAL
A
B
Blk. 1: Start Dec. 23; End Dec. 31.
Blk. 2: Start Jan. 1; End Jan. 2.
SET
24
HOLIDAY
LATITUDE
SUNSET
SUNRISE
Hide quick links:
Advertisement
Table of Contents
