To Change Date; To Set Daylight Savings Dates - Tork DZS200 Installation & Operation Manual

Press ENTER.
The month digits are flashing. Press ADVANCE, to set
the month. Press ENTER.
The date digits are flashing. Press ADVANCE to set
the current date. Press ENTER.
The year digits are flashing. Press ADVANCE to set
the present year. Press ENTER.
The DATE symbol is flashing again. Press ADVANCE
to go to another mode or RUN/SET to go to the Run
mode.

2.1 TO CHANGE DATE

Press the RUN/SET key once if in the Run mode or
twice if in another mode. The TIME/DAY symbol flash-
es. Press ADVANCE to go to the Date mode. (DATE
symbol flashes). Press ENTER.
The month digits flash. Press ADVANCE to modify it if
needed. Press ENTER.
The date digits flash. Proceed in the same way as
before for the date and year digits.
When you are finished, the DATE symbol will again
flash. Press ADVANCE to proceed to another mode or
RUN/SET to go to the Run mode.

3.0 TO SET DAYLIGHT SAVINGS DATES

NOTE: The daylight savings dates are set in the
block holiday portion of the Holiday mode.
Press the RUN/SET key to go from the Run mode to
the Set modes. The TIME/DAY symbol flashes. Press
ADVANCE and go to the Holiday mode. Press ENTER
when the HOLIDAY symbol is flashing.
3
SIG. TIMER
SU MO TU WE TH FR SA H1 H2
TIME/DAY
DATE
SCH/RVU
SCH. ON
SIGNAL A
OFF
B
8
HOLIDAY
LATITUDE
SUNSET
SUNRISE
SET