Table of Contents
Advertisement
The bar over Sunday is flashing. Press ENTER for the
days or holidays you desire astronomic operation and
ADVANCE to pass the days for which you do not want
astronomic.
After selecting the days, the LATITUDE symbol will
again be flashing. Press ADVANCE.
The display shows the sunset time and the SUNSET
symbol is flashing.
NOTE: Your actual sunset and sunrise times may
differ from that displayed depending on your
location with respect to the longitudinal time
line. Use the offset adjustment to set your
actual times.
Press ENTER while the SUNSET symbol is flashing if
you wish to set an offset to the sunset time.
19
TIME/DAY
DATE
SIG. TIMER
SCH/RVU
The offset digits are flashing. Press ADVANCE to set
the offset minutes. If the offset is for activation before
the sunset time displayed, continually press
ADVANCE until a "–" is displayed before the digits.
NOTE: "+" means after and "–" means before. Pay
attention to this symbol when adjusting off-
sets.
Press ENTER.
The SUNSET symbol is again flashing. Press
ADVANCE. The sunrise time is now displayed.
TIME/DAY
20
SIG. TIMER
SCH/RVU
SU MO TU WE TH FR SA H1 H2
SCH.
ON
OFF
SIGNAL
A
B
SU MO TU WE TH FR SA H1 H2
DATE
SCH.
ON
OFF
SIGNAL
A
B
PM
SET
AM
SET
20
HOLIDAY
LATITUDE
SUNSET
SUNRISE
HOLIDAY
LATITUDE
SUNSET
SUNRISE
Hide quick links:
Advertisement
Table of Contents
