Review, Modify, Delete Schedule; Manual Override; Update Status; Review, Modify And Delete - Tork EW101B Instruction Manual

EW101B single 7/25/07
b. Press EVENT to set desired event (ON/OFF).
Press DAY to select desired days and then press
ENTER. The display will show:
CLK DATE
Follow the same procedures above to set more
schedule entries.

5.0 REVIEW, MODIFY AND DELETE

Press MODE to advance to any of the following
MODES:
1. CLOCK MODE: Press HOUR and MIN to modi-
fy existing settings. Press ENTER.
2. DATE MODE: Press MONTH, DATE and YEAR
to modify existing settings. Press ENTER. DAY is
automatically adjusted.
3. DST Daylight Saving Time: To review press
ENTER. To modify press MONTH, DAY and
DATE to change existing setting. Press ENTER.
4. SCHEDULE MODE: Press HOUR, MIN and
EVENT to modify time settings. Press DAY to
modify days, DEL to delete. Press ENTER after
each modification.
5. RUN MODE: The time, day, seconds, the load
status and AUTO is displayed.
6.0 OVERRIDE
OVR (Override) is effective in the AUTO mode and
the MANUAL mode. OVR on the AUTO mode is
effective until the next event. OVR on the manual
mode is effective indefinitely.
7.0 EVENT (in the RUN mode) key is used to update
the load status. It will execute the last scheduled
event. If there is no schedule programmed, the dis-
play will show —:—
11:45 AM Page 8
SCH AUTO MAN
6