To Set Holidays - Tork DZS200 Installation & Operation Manual

Press RUN/SET. The TIME/DAY symbol flashes.
Press ADVANCE 3 times. SCH/RVU symbol flashes.
Press ENTER. "C1" flashes.
Press ENTER. The bar under Sunday flashes. (If
RVU flashes, press ADVANCE)
Press ENTER 9 times to select everyday and H1
and H2. The dashes for hour flash.
Press ADVANCE. Hour shows "12:00 AM".
Press ENTER. Digits for minutes flash.
Press ADVANCE until minutes show "30".
Press ENTER. Bar over ON flashes.
Press ADVANCE. Bar over OFF flashes. Press
ENTER.
We do not need to go to the Sunrise mode since we
don't need to set a sunrise offset.
Press RUN/SET to go to the Run mode.
NOTE: The sunrise OFF time will be placed in the
schedule area but the lights would already be
off from 12:30 AM.

7.0 TO SET HOLIDAYS

- To Set Single-day Holidays (H1)
If you are in the Run mode, press the RUN/SET key
The TIME/DAY symbol will begin to flash. Press
ADVANCE until the HOLIDAY symbol is flashing. The
display shows
TIME/DAY
21
SIG. TIMER
SCH/RVU
Press ENTER.
The bar under H1 is flashing. Press ENTER.
The left (month) dashes will flash. Press the
ADVANCE key to set the holiday month. Press
ENTER.
SU MO TU WE TH FR SA H1 H2
DATE
SCH. ON OFF
SIGNAL A B
SET
22
HOLIDAY
LATITUDE
SUNSET
SUNRISE