Table of Contents
Advertisement
DZS200
1. DESCRIPTION
1. 2 Channel controller
2. 365 Day holiday scheduling on both channels
3. Astronomic setting on one or both channels
4. Holiday settings — 16 single dates for 8th day
schedules and 5 block holidays of unlimited
duration
5. Signaling — 48 momentary contact signals
per channel, 1-99 seconds duration (user
settable)
6. Manual overrides to the next scheduled event
7. Automatic daylight saving user settable
8. Automatic leap year compensation
9. AM/PM or 24 hour format
10. Battery backup — 72 hours — recharges
automatically
2. INSTALLATION
1. Remove unit from enclosure (see diagram on
page3), push tab to swing unit to left and
remove.
2. Mount the enclosure at eye level using screws
or other suitable fastening device.
3. Controller is set up to dis-
play in AM/PM format. For
24 hour operation, locate
blue jumper on printed cir-
cuit board (there is only one)
and insert it onto both pins.
NOTE: Jumper is on one pin
only. (See illustration)
4. Connect battery (included) to the unit by gen-
tly pushing it onto mount in back of the unit.
NOTE polarity of snap-in socket.
5. Bring supply and load wires in through bottom
or side knockouts. Be sure the unit is ground-
ed at convenient terminal marked "GND".
6. Reinstall unit by reversing step 1 above and
connect wires to unit, as per suggested wiring
diagram. See diagram on page 3.
5
10
JP4
JP3
Hide quick links:
Advertisement
Table of Contents
