Tork DZS200 Installation & Operation Manual page 17

MON thru FRI, 10:10 AM, SIG. A — End of Break
MON thru FRI, 12:00 PM, SIG. B — Lunchtime
MON thru FRI, 12:30 PM, SIG. B — End of Lunch
MON thru FRI, 3:00 PM, SIG. A — Afternoon Break
MON thru FRI, 3:10 PM, SIG. A — End of Break
MON thru FRI, 4:30 PM, SIG. B — End of Work
First we will set the signal durations.
Press RUN/SET. TIME/DAY symbol flashes.
Press ADVANCE 2 times. SIG. TIMER symbol
flashes.
Press ENTER. "t1" flashes.
Press ADVANCE. "t2" flashes.
Press ENTER. A bar is over SIG. A and its digits
flash.
Press ADVANCE until SIG. A digits show "03".
Press ENTER. The bar moves over SIG. B and its
digits flash.
Press ADVANCE until SIG. B digits show "10".
Press ENTER. SIG. TIMER symbol flashes again
and "t1" shows on display.
The signal durations for channel 2 are now set and the
channel is configured for signal timer. Now we must
schedule the signals.
Press ADVANCE. SCH/RVU symbol flashes.
Press ENTER. "c1" flashes.
Press ADVANCE. "t2" flashes.
Press ENTER. Bar under Sunday flashes.
Press ADVANCE to skip SU. Press ENTER 5 times
to select MO, TU, WE, TH, FR. Press ADVANCE 3
times to skip SA, H1, H2. The days are set and the
dashes for hour flashes.
Press ADVANCE until hour shows 8:00 AM.
Press ENTER. Minute digits flash "00".
Press ENTER. The bar over SIG. A flashes.
Press ADVANCE. The bar over SIG. B flashes.
Press ENTER. The bar under Sunday flashes
again.
The first signal is now in memory. Schedule the other
signals in a similar fashion.
17