Table of Contents
Advertisement
TIME/DAY
27
SIG. TIMER
SCH/RVU
Press ENTER while DLT is flashing to delete the set-
ting. The next setting, if any, will be displayed.
- modify
To modify a setting, press ADVANCE twice while the
setting is being displayed and RVU is flashing. RVU
will stop flashing and show steady. The bar under
Sunday will begin to flash. Use the ADVANCE and
ENTER keys to select new days or reselect the previ-
ous days. Modify the time and event information in a
similar manner. Press ENTER to accept the new infor-
mation. The next setting, if any, will now be displayed
and RVU will flash again. Continue as before.
Press RUN/SET to quickly exit to the Run mode.
9.0 TO REVIEW / MODIFY SIGNAL DURATIONS
From the Run mode, press the RUN/SET key to enter
the Set mode. The TIME/DAY symbol is flashing.
Press ADVANCE until the SIG TIMER symbol is flash-
ing. Press ENTER.
"t1" is flashing and the signal durations for channel 1
are being displayed both for Sig.A and Sig.B if previ-
ously set. If you wish to modify the settings, press
ENTER and use the ADVANCE key to change the
flashing information. Press ENTER to store the modi-
fied information. If you wish to see the signal durations
for channel 2, press ENTER again until the 1 flashes.
Press ADVANCE to flash "t2" then press ENTER.
The signal durations will be displayed with SIG.A dura-
tion flashing. Use the ADVANCE key to make
changes. If no change is desired, press ENTER until
the TIMER symbol is again flashing or press RUN/SET
to exit to the Run mode.
SU MO TU WE TH FR SA H1 H2
DATE
SCH.
ON
OFF
SIGNAL
A
B
AM
DLT
SET
26
HOLIDAY
LATITUDE
SUNSET
SUNRISE
Hide quick links:
Advertisement
Table of Contents
