Review, Modify, Delete Schedules; Manual Override - Tork E101B Instruction Manual

E101B SINGLE 7/22/07
4.1 SETTING HOURS AND MINUTES
Press HOUR and MIN to set desired time. Press
EVENT to set desired event (ON/OFF) and then
press ENTER. The display will show:
CLK DATE
Follow the same procedures above to set more
schedule entries.
5.0 REVIEW, MODIFY AND DELETE
Press MODE to advance to any of the following
MODES:
1. CLOCK MODE: Press HOUR and MIN to mod-
ify existing settings. Press ENTER.
2. DATE MODE: Press MONTH, DATE and YEAR
to modify existing settings. Press ENTER. DAY
is automatically adjusted.
3. DST Daylight Saving Time: To review press
ENTER. To modify press MONTH, DATE and
DAY to change existing setting. Press ENTER.
4. SCHEDULE MODE: Press HOUR, MIN and
EVENT to modify time settings. Press DEL to
delete. Press ENTER after each modification.
5. RUN MODE: The time, day, seconds, the load
status and AUTO is displayed.
6.0 OVERRIDE
OVR (Override) is effective in the AUTO mode
and the manual mode. OVR on the AUTO
mode is effective until the next event. OVR on
the manual mode is effective indefinitely.
10:02 PM Page 8
SCH AUTO MAN
6