To Set Schedule For Holiday Only; To Add/Review/Delete/Modify Schedules - Tork DZS200 Installation & Operation Manual

7.1 TO SET SCHEDULE FOR HOLIDAY ONLY

Follow the procedure as outlined in section 4 for stan-
dard ON/OFF or section 5 for signals. When the bar
flashes under Sunday, press the ADVANCE key until
the bar under H1 or H2 flashes. Press ENTER for the
desired selection and continue as shown in the section.
8.0 TO ADD / REVIEW / DELETE / MODIFY
SCHEDULES
If you are in the Run mode, press the RUN/SET key
then press ADVANCE until the SCH/RVU symbol is
flashing. Press ENTER.
"C1" (or "t1") is flashing. Press ENTER to select it or
press ADVANCE then ENTER to select channel 2.
TIME/DAY
26
SIG. TIMER
SCH/RVU
RVU will be flashing. If RVU is not flashing, the chan-
nel has not been programmed. Go to section 4 or 5 to
program the channel.
- add
If you want to add schedules without reviewing, press
ADVANCE. Proceed as in section 4.0.
- review
Press ENTER while RVU is flashing to display the first
(earliest) setting. Continue to press ENTER to review
the other settings for the channel. After the last setting
is displayed, the display will show dashes and the
SCH/RVU symbol will begin flashing again.
- delete
To delete a setting, press ADVANCE while RVU is
flashing and the setting is being displayed. DLT will
begin to flash.
SU MO TU WE TH FR SA H1 H2
DATE
SCH. ON OFF
SIGNAL A B
AM
RVU SET
25
HOLIDAY
LATITUDE
SUNSET
SUNRISE