Table of Contents
Advertisement
The setting is entered in memory and the display again
shows
TIME/DAY
11
SIG. TIMER
SCH/RVU
The bar under Sunday is flashing.
Proceed as before to enter more schedules ON and
OFF. When you are finished entering the schedules for
the channel, press RUN/SET to quickly exit the mode.
You can program the other channel by pressing the
RUN/SET key again. The TIME/DAY symbol will flash.
Use the ADVANCE key to proceed to the SCH/RVU
mode. Proceed as before.
Example: A store light has the following schedule on
channel #1:
MON thru SAT, 7:00 AM, ON
MON thru SAT, 10:30 PM, OFF
SUN, 11:00 AM, ON
SUN, 6:00 PM, OFF
The programming steps are as follows:
Press RUN/SET. TIME/DAY symbol flashes.
Press ADVANCE 3 times. SCH/RVU symbol flashes.
Press ENTER. "C1" flashes.
Press ENTER. The bar under Sunday flashes
(unless a schedule had already been entered, in
which case the RVU will flash – press ADVANCE to
get the bar under SU to flash.)
Press ADVANCE to skip SU. Press ENTER 6 times
to select Monday through Saturday. Press
ADVANCE 2 times to skip H1 and H2. The days are
selected and the dashes for the hour is flashing.
Press ADVANCE until the hour shows 7:00 AM.
Press ENTER. Minutes are flashing "00". Press
ENTER. Bar over the "ON" flashes. (If bar was over
SU MO TU WE TH FR SA H1 H2
DATE
SCH.
ON
OFF
SIGNAL
A
B
AM
SET
13
HOLIDAY
LATITUDE
SUNSET
SUNRISE
Hide quick links:
Advertisement
Table of Contents
